Euro 2000 cable protection for the chemical and pharmaceutical sector

The chemical and pharmaceutical sector includes the transformation of organic and inorganic raw materials into chemical products and the production of finished and non-finished products in the pharmaceutical sector.

In companies that produce drugs for mixing, emulsifying and chemical reaction of organic compounds, environmental conditions can occur that create potentially explosive atmospheres. In addition to industrial plants where a production process takes place, there are chemical research and development laboratories, within which liquids, gases or combustible powders may be present in quantities that can still represent a risk of explosion.

In the chemical-pharmaceutical industry, electrical equipment must be able to operate even in the absence of human resources but in the presence of inhospitable atmospheres, high pressure and extreme temperatures.

Cable protection for the chemical and pharamaceutical industry

According to the EHEDG (European Hygiene Engineering and Design Group) protocols, EURO 2000 has developed a series of protection systems for electrical cables that comply with the recommended hygiene requirements in areas subject to splashing and non-spraying, in processes of processing and packaging of medicines and chemicals all in accordance with the guidelines of the EHEDG commission. The same hygienic protection systems can also be applied in processes in the pharmaceutical industry.

Euro 2000’ applications for cable protection systems in chemical and pharmaceutical sector
Some of our cable protection systems are designed and suitable for the chemical and pharmaceutical sectorand find applications in process plants, mixing units, bakery plants, packaging plants for fish and meat processing, conveyor belts, weighing machines, control equipment and electrical panels, instrumentation, areas at risk of explosion.

TXR system is a very resistant stainless steel duct made of AISI 304 or 316l stainless steel, in lengths of 3 m, coupled to the EURO 2000 quick couplings is used in environments that require extreme mechanical resistance and corrosion.

Application examples in the chemical and pharmaceutical

Process plants, mixing units, bakery plants, packaging plants fish and meat processing plants, conveyor belts, weighing machines, control equipment and electrical panels, instrumentation, hazardous areas.

Certifications

American Society for Testing and Materials

ASTM International is a scientific and technical organization established for "the development of standards on the characteristics and performance of materials, products, systems and services.

Association of eletrical, electronic and infromation technologies

VDE, the Association for Electrical, Electronic and Information Technologies is one of the largest technical and scientific associations in Europe.

ATEX System_IMQ_24_ATEX_012_X

Equipment and protective systems intended for use in potentially explosive atmospheres (ATEX) cover a range of products.

ATEX System_IMQ_24_ATEX_013_X

Equipment and protective systems intended for use in potentially explosive atmospheres (ATEX) cover a range of products.

ATEX System_IMQ_24_ATEX_014_U

Equipment and protective systems intended for use in potentially explosive atmospheres (ATEX) cover a range of products.

CE compliance

The CE marking is a logo that certifies the conformity of a product to European Union legislation by certifying compliance with the marketing and use requirements of a product in the Community Economic Area.

CE compliance for ATEX directive: Ensures equipment safety in explosive atmospheres

CE compliance for ATEX signifies compliance with safety standards for equipment used in explosive atmospheres, ensuring products meet essential requirements for such environments within the EU and EEA.

Electromagnetic compatibility (EMC) - Ex cable glands

Ex EMC cable glands is that the cable shield, ensuring 360° contact or max. contact to prevent or keep electromagnetic interference (EMI), and ESD disturbances within permitted limits.

Electromagnetic compatibility (EMC) system

Electromagnetic compatibility (EMC) system ensuring and keep electromagnetic interference (EMI) and ESD disturbances within permitted limits.

Federal Executive Body (Russian Federation) - Gost-R POCC IT.HB56.H01066

GOST R certificate is a document attesting to the compliance of a product with the technical standards of the Russian Federation. GOST R certification is equivalent to CE marking in Europe.

Federal Executive Body (Russian Federation) - Gost-R POCC IT.HB56.H01067

GOST R certificate is a document attesting to the compliance of a product with the technical standards of the Russian Federation. GOST R certification is equivalent to CE marking in Europe.

Flexible conduits system (DMT) - IMQ CA02.01255

EN IEC 61386 specifies requirements and tests for sheathed pipe systems and their fittings for the protection of insulated conductors and/or cables in electrical installations

Flexible conduits system (GFPT) - IMQ CA02.01254

EN IEC 61386 specifies requirements and tests for sheathed pipe systems and their fittings for the protection of insulated conductors and/or cables in electrical installations

Halogen free

Halogen free identifies electrical cables and protection systems for halogen-free electrical cables, i.e. low emission of fumes, toxic and corrosive gases. Halogen-free cable protection systems and electrical cables do not contain chlorine, fluorine, bromine, iodine.

IECEx System_IECEx IMQ 24.0004X

International Electrotechnical Commission System for Certification to Standards Relating to Equipment for Use in Explosive Atmospheres.

IECEx System_IECEx IMQ 24.0005U

International Electrotechnical Commission System for Certification to Standards Relating to Equipment for Use in Explosive Atmospheres.

International Railway Industry Standard (ISO TS 22163) - 238323138

ISO/TS 22163:2017 is a new standard that replaces the IRIS standard. Basically ISO/TS 22163 is a combination of ISO 9001:2015 and railway-specific requirements (specific requirements applicable in the railway sector).

International Railway Industry Standard (ISO TS 22163) - 312806111

Italian Naval Register - ELE063822CS

It is a certification required for products that must be installed on board ships classified RINA and is carried out in accordance with the Regulation for testing, certification and acceptance of marine equipment and materials.

License for transport of hazardous goods

International Carriage of Dangerous Goods by Road

Limiting Oxygen Index of greater than 32%, low smoke and low toxicity

The materials classified Extra Low fire are characterized by a limiting oxygen index of more than 32%, therefore low smoke and low toxicity and low flammability.

Metallic conduits system (serie TXR) - IMQ CA02.05590

EN IEC 61386 specifies requirements and tests for sheathed pipe systems and their fittings for the protection of insulated conductors and/or cables in electrical installations

Metallic conduits system (serie TZR) - IMQ EQ877

EN IEC 61386 specifies requirements and tests for sheathed pipe systems and their fittings for the protection of insulated conductors and/or cables in electrical installations

National Fire Protection Association

The NFPA has established a set of safety codes for various environments and applications. NFPA 130 provides fire protection and safety requirements for underground, surface and elevated rail systems.

Pliable conduits system (DMA) - IMQ CA02.01257

EN IEC 61386 specifies requirements and tests for sheathed pipe systems and their fittings for the protection of insulated conductors and/or cables in electrical installations

Pliable conduits system (DMC) - IMQ CA02.01256

EN IEC 61386 specifies requirements and tests for sheathed pipe systems and their fittings for the protection of insulated conductors and/or cables in electrical installations

Registration, Evaluation, Authorization and Restriction of Chemicals

REACH refers to the Regulation concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals. REACH applies to all chemicals required for industrial processes.

Resistenza alle radiazioni UV

EN ISO 4892-2:2013 specifies the test methods used to measure the performance of products in terms of UV resistance and to assess exposure to ultraviolet light.

Resistenza alle radiazioni UV - ISO 4892-2:2013 - 0133FPMMATs19

EN ISO 4892-2:2013 specifies the test methods used to measure the performance of products in terms of UV resistance and to assess exposure to ultraviolet light.

Restriction of Hazardous Substances directive

Directive 2002/95/EC requires compliance with the six restricted substances: cadmium, chromium (VI), lead, mercury, polybrominated biphenyls (PBBs) and polybrominated diphenyl ethers (PBDEs) and phthalates to be demonstrated.

Rigid (metallic) conduits system (serie TXR) - IMQ IT-22541

EN IEC 61386 specifies requirements and tests for sheathed pipe systems and their fittings for the protection of insulated conductors and/or cables in electrical installations

Standards for fire behavior of vechile interiors according to UNECE 118

Regulation R 118.02 applies to determine combustion behaviour (ignition, burning rate and melting behaviour) and repelling fuel or lubricants of interior materials used in passenger vehicles.

Standards for rolling stock (halogen free) EN 45545-2

The EN 45545 standard specifies the fire behavior requirements of materials and products used on railway vehicles as defined in UNI CEI EN 45545-15, meeting the European standard for fire protection on railway vehicles.

Transport for London – TFL

Transport for London (TfL) è un ente governativo locale responsabile della maggior parte degli aspetti del sistema di trasporto nella Grande Londra. TFL è responsabile della metropolitana di Londra, delle ferrovie di Londra e dei trasporti di superficie.

UL 1696 Mechanical Protection Tubing (MPT) and Fittings - E178449

UL 1696 applies to non-metallic or composite mechanical protective tubes (MPTs), non-metallic, composite or metal fittings and clamps used for supporting, passing and mechanical protection of conductors, wires and cables.

Euro 2000 cable protection for the chemical and pharmaceutical sector

Cable protection for the chemical and pharamaceutical industry

Application examples in the chemical and pharmaceutical

Recommended products for this sector